Moving Light Supertruss

Construct

Moving Light Truss

2d
3d
pdf_icon1

 

line

 

 

Moving Light supertruss is 30″ x 30″ in size (other sizes are available). Moving light supertruss provides a substantial increase in load bearing
capacity over the flat plate pre-rigged truss. It is manufactured from aluminum tube 6061-T6 or 6082-T6
with 2″ x .157″ wall thickness for main tubes and 1″ x .125″ wall tube for the diagonals. Each truss piece
has 8 castor wheels for easy maneuverability and pins and R-clips for the connection of truss pieces.
Each 96” truss is designed to carry 3 moving light fixtures. The moving lights are stored internally in
the truss and can be lowered to the working position when in use. This design reduces the amount of
space required for lighting and rigging in the truck. .
Two handles allow the lowering of each moving light. The following units have been tried in our
moving light trusses:
Highend Studio Color and Studio Spot.
Coemar CF7 wash fixture
Martins line of Mac fixtures; 250, 300, 500, 600, and 2000
Other fixtures may fit within the design of this truss by using a custom fitted plate.
The whole system can be used with our Ground Support System by using suitable sleeve blocks and
towers.
Please note: no fixtures are included with truss.